The PG5900A Series is a highly reliable and fault tolerant Industrial Protocol Gateway. Its powerful architecture provides seamless conversion between the different Ethernet-based protocol that can be set up as dual-subnet or RSTP or PRP* redundancy. This device is designed to work in most demanding industries such as power substations, power generation, oil and gas, farming and manufacturing.

The configuration carried out through a user friendly, Java- Based Windows Utility called eNode Designer, that allows configuring target platforms, set device properties and protocol data mapping. The configuration is completely dependent on the “eNode Module” which represents that device or application – but may include things such as changing the communication port settings and defining where data point information enters and leaves the eNode Designer system.

PG5900A Series embeds an additional layer of security, allowing the devices to be deployed in topologies that request data to flow through the Internet and preventing sensitive control and monitoring data to be readable from malicious activities. IPsec VPN encryption, configurable in both peer-to-peer and peer-to-side modes will make sure the data passing is encrypted through a strong 128, 192 or 256-bit AES encryption. OpenVPN-based applications can take advantage of Client/Server support on our device.

An additional highlight of ATOP protocol gateways is the ability to enable multiple protocols simultaneously. In contrast to conventional gateways, which require predefinition of a single master and slave protocol each, the Full-License model allows users to transform multiple incoming protocols in our protocol base to others compatible with the output side, achieving powerful protocol conversion functions, flexible operations, and easier maintenance.

* PRP redundancy is only applicable for protocol conversion function

Application

The protocol gateway’s embedded protocol stacks allow

• Seamless conversion
• Exception/error Management
• Unsolicited event management for the protocols requiring them (such as DNP3)
• High performance
• Low cost

The example shows how to Easily connect a Modbus Serial HMI, through Atop’s Protocol Gateway to a DNP3.0 Ethernet Server IED. The host HMI has the role of a Modbus Serial Master while the end-device to be accessed is a DNP3.0 Ethernet Server.

Atop’s protocol Gateway acts towards the HMI seamlessly as a Modbus Serial Slave, answering the poll commands or the write commands required by the Host by its virtual Modbus ID. Meanwhile, it acts as a DNP3.0 Ethernet Client with regard to the end-device whose DNP3.0 address is mapped to the virtual Modbus ID that the HMI is accessing.

Be careful! – all gateway functions listed in the datasheet refer to the “Gateway” role, and not which “host” or “slave” the gate way is connected to. In this example, the SKU shown is “MBSS-DNEC” (Modbus Serial Slave to DNP3.0 Ethernet Client)

Network Interface
Speed	IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) - RJ45 version IEEE 802.3u 100Base-FX - SFP version
Network mode	Independent IP address (6 ports) or Independent IP address (4 ports) + Unmanaged Switch (3 ports, including LAN4)
Connector ports	RJ45 x 6 (RJ45 version) SFP x 6 (SFP version)

Software
Protocols	IPv4, ARP, ICMP, TCP, UDP, DHCP Client, DNS Client, Telnet, HTTP, HTTPS, SMTP/TLS, SNMP v1/v2c/v3, Syslog, 802.1D-2004 RSTP, OpenVPN or IPsec VPN (peer-to-peer or peer-to-side), with a maximum VPN throughput of 37.9Mbps(*), and PPTP
Configuration	Atop Management Utility, Web UI, Telnet, Serial Console, ATOP eNode Designer
Protocol setting	eNode designer
Supported Protocols	Modbus TCP/RTU/ASCII, DNP3.0 over serial and TCP/IP, IEC61850, IEC60870-5-101, IEC60870-5-103, IEC60870-5-104
Protocol specifications	Refer to datasheet

Power	Value
Rated Supply Voltage	Redundant 24-48 VDC or Redundant 100-240 VAC/ 100-370 VDC (HV Series)
Input Voltage Range	Redundant 19.2-52.8 VDC or Redundant 85-264 VAC/ 100-370 VDC (HV Series)
Input Current	0.73 A @ 24 VDC 0.35 A @ 100 VAC 0.20 A @ 100 VDC
Power Consumption	Approximately 20 W (Max)
Connector	10-Pin Terminal Block
Power Redundancy	Yes
Reverse Polarity Protection	Yes

Physical Characteristics	Value
Housing	IP30 SPCC housing
Dimension (W x H x D)	440.6 x 44 x 309 mm (1U Rack-mount)
Weight	4,000g
Installation	19’’ Rack-Mount (Kit included)
Reset Button	Yes

Environmental Limits
Operating Temperature	-40°C~80°C (-40°F~176°F)
Storage Temperature	-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity	5%~95%, 55°C (Non-condensing)

Certification	Standard
Safety	EN61010-1, EN 61010-2-201
EMC	FCC Part 15, Subpart B, Class A, EN 55032, Class A, EN 61000-6-2, EN 61000-3-2, EN 61000- 3-3, EN 55024, EN 61000-6-4, IEC 61850-3 / IEEE 1613

Standard	Item	Test	Value	Level
IEC 61000-4-2	ESD	Contact Discharge	±8kV	4
IEC 61000-4-2	ESD	Air Discharge	±15kV	4
IEC 61000-4-3	RS	Radiated (enclosure)	20 V/m	3
IEC 61000-4-4	EFT	AC Power Port	±4.0kV	4
IEC 61000-4-4	EFT	DC Power Port	±4.0kV	4
IEC 61000-4-4	EFT	Signal Port	±4.0KV	4
IEC 61000-4-5	Surge	AC Power Port (L-2-L)	Line-to Line±2.0KV	4
IEC 61000-4-5	Surge	AC Power Port (L-2-E)	Line-to Earth±4.0KV	4
IEC 61000-4-5	Surge	DC Power Port (L-2-L)	Line-to Line±1.0KV	3
IEC 61000-4-5	Surge	DC Power Port (L-2-E)	Line-to Earth±2.0KV	3
IEC 61000-4-5	Surge	Signal Port (L-2-E)	Line-to Earth±4.0KV	4
IEC 61000-4-6	CS	AC Power Port	10 V rms	3
IEC 61000-4-6	CS	DC Power Port	10 V rms	3
IEC 61000-4-6	CS	Signal Port	10 V rms	3
IEC 61000-4-8	PFMF	Enclosure	100 A/m 1000 A/m (1sec.)	5 6
IEC 61000-4-11	DIP	AC Power Port	30% reduction (Voltage Dips), 1 period 60% reduction (Voltage Dips), 50 period 100%, reduction (Voltage interruptions), 5 period 100% reduction (Voltage interruptions), 50 period	-

Certification	Standard
Shock	MIL-STD-810F Method 516.5
Drop (Freefall)	MIL-STD-810F Method 516.5
Vibration	MIL-STD-810F Method 514.5 C1 & C2
RoHS	Yes
MTBF	PG5900A: 16.60 years PG5916A-6SFP-Sis-HV: 9.18 years PG5916A-6SFP-Sis: 8.63 years
Warranty	SE5916A-6SFP-Sis-HV: 9.18 years SE5916A-6SFP-Sis: 8.63 years PG5900A / PG5908A / PG5916A: 5 years

Hardware
PG5900A-6SFP	Industrial Protocol Gateway,10/100BASE-T(X) SFP slot, 24-48 VDC
PG5900A-6SFP-HV	Industrial Protocol Gateway,10/100BASE-T(X) SFP slot, 100-240VAC/ 100-370VDC
PG5900A	Industrial Protocol Gateway,10/100BASE-T(X) RJ45, 24-48 VDC
PG5900A-HV	Industrial Protocol Gateway,10/100BASE-T(X) RJ45, 100-240VAC/ 100-370VDC

Optional Accessories
SDR-75-24	50500752240001G	75W/3.2A DIN-Rail 24VDC power supply with universal 88-264VAC / 124-370VDC input
GDC-120	59906861G	120mm copper woven grounding cable
ADP-DB9(F)TB5	59906231G	Female DB9 to Female 3.81mm TB5 Converter
AXFD-1314-0523	522AXFD1314001G	SFP Transceiver;155Mbps, Multi-mode;1310nm;2km;-40~85, DDMI
AXFD-1314-0553	522AXFD1314011G	SFP Transceiver, 155Mbps, SFP Transceiver;155Mbps, Single-mode;1310nm;30km;-40~85, DDMI

Protocols
01SS-03SM	IEC 60870-5-101 Serial Slave to IEC 60870-5-103 Serial Master
01SS-04EC	IEC 60870-5-101 Serial Slave to IEC 60870-5-104 Ethernet Client
01SS-50EC	IEC 60870-5-101 Serial Slave to IEC 61850 Client
01SS-DNEC	IEC 60870-5-101 Serial Slave to DNP3 Ethernet Client
01SS-DNSM	IEC 60870-5-101 Serial Slave to DNP3 Serial Master
01SS-MBEC	IEC 60870-5-101 Serial Slave to Modbus Ethernet Client
01SS-MBSM	IEC 60870-5-101 Serial Slave to Modbus Serial Master
04ES-01SM	IEC 60870-5-104 Ethernet Server to IEC 60870-5-101 Serial Master
04ES-03SM	IEC 60870-5-104 Ethernet Server to IEC 60870-5-103 Serial Master
04ES-50EC	IEC 60870-5-104 Ethernet Server to IEC 61850 Ethernet Client
04ES-DNEC	IEC 60870-5-104 Ethernet Server to DNP3 Ethernet Client
04ES-DNSM	IEC 60870-5-104 Ethernet Server to DNP3 Serial Master
04ES-MBEC	IEC 60870-5-104 Ethernet Server to Modbus Ethernet Client
04ES-MBSM	IEC 60870-5-104 Ethernet Server to Modbus Serial Master
50ES-01SM	IEC 61850 Ethernet Server to IEC 60870-5-101 Serial Master
50ES-03SM	IEC 61850 Ethernet Server to IEC 60870-5-103 Serial Master
50ES-04EC	IEC 61850 Ethernet Server to IEC 60870-5-104 Ethernet Client
50ES-DNEC	IEC 61850 Ethernet Server to DNP3 Ethernet Client
50ES-DNSM	IEC 61850 Ethernet Server to DNP3 Serial Master
50ES-MBEC	IEC 61850 Ethernet Server to Modbus Ethernet Client
50ES-MBSM	IEC 61850 Ethernet Server to Modbus Serial Master
DNES-01SM	DNP3 Ethernet Server to IEC 60870-5-101 Serial Master
DNES-03SM	DNP3 Ethernet Server to IEC 60870-5-103 Serial Master
DNES-04EC	DNP3 Ethernet Server to IEC 60870-5-104 Ethernet Client
DNES-50EC	DNP3 Ethernet Server to IEC 61850 Ethernet Client
DNES-DNSM	DNP3 Ethernet Server to DNP3 Serial Master
DNES-MBEC	DNP3 Ethernet Server to Modbus Ethernet Client
DNES-MBSM	DNP3 Ethernet Server to Modbus Serial Master
DNSS-01SM	DNP3 Serial Slave to IEC 60870-5-101 Serial Master
DNSS-03SM	DNP3 Serial Slave to IEC 60870-5-103 Serial Master
DNSS-04EC	DNP3 Serial Slave to IEC 60870-5-104 Ethernet Client
DNSS-50EC	DNP3 Serial Slave to IEC 61850 Ethernet Client
DNSS-DNEC	DNP3 Serial Slave to DNP3 Ethernet Client
DNSS-MBEC	DNP3 Serial Slave to Modbus Ethernet Client
DNSS-MBSM	DNP3 Serial Slave to Modbus Serial Master
MBES-01SM	Modbus Ethernet Server to IEC 60870-5-101 Serial Master
MBES-03SM	Modbus Ethernet Server to IEC 60870-5-103 Serial Master
MBES-04EC	Modbus Ethernet Server to IEC 60870-5-104 Ethernet Client
MBES-50EC	Modbus Ethernet Server to IEC 61850 Ethernet Client
MBES-DNEC	Modbus Ethernet Server to DNP3 Ethernet Client
MBES-DNSM	Modbus Ethernet Server to DNP3 Serial Master
MBSS-01SM	Modbus Serial Slave to IEC 60870-5-101 Serial Master
MBSS-03SM	Modbus Serial Slave to IEC 60870-5-103 Serial Master
MBSS-04EC	Modbus Serial Slave to IEC 60870-5-104 Ethernet Client
MBSS-50EC	Modbus Serial Slave to IEC 61850 Client
MBSS-DNEC	Modbus Serial Slave to DNP3 Ethernet Client
MBSS-DNSM	Modbus Serial Slave to DNP3 Serial MasterMBSS-MBEC
FL	Allows a model to run single or multiple protocol(s) in both front-end to SCADA and back-end to IED sides

Datasheet

VERSION	NAME	TIME	SIZE	DOWNLOAD
v1.7	Datasheet EN	2025-12-17	214.71 KB

Hardware Installation Guide

VERSION	NAME	TIME	SIZE	DOWNLOAD
v1.4	SE5908A Hardware Installation Guide	2024-01-30	3.37 MB
v1.3	SE5916A/MB5916A/PG5916A Hardware Installation Guide	2017-01-23	4.39 MB

Manual

VERSION	NAME	TIME	SIZE	DOWNLOAD
v1.5	eNode Designer User Manual 101-104 Atop	2024-12-30	2.71 MB
v1.6	eNode Designer User Manual DNP3.0 Atop	2024-12-30	5.65 MB
v1.6	eNode Designer User Manual Modbus Atop	2024-12-30	1.26 MB
v1.5	eNode-Designer-User-Manual-103-Atop	2024-12-30	1.19 MB
v1.6	eNode-Designer-User-Manual-IEC61850-Atop	2024-12-30	948.18 KB
v1.8	Getting started with Atop PG and eNode Designer	2024-12-30	3.84 MB

Firmware

VERSION	NAME	TIME	SIZE	DOWNLOAD
v1.00	PG59XX DNP3.0-Ethernet-Server	2024-12-30	143.90 MB
v1.00	PG59XX DNP3.0-Serial-Slave	2024-12-30	143.90 MB
v1.00	PG59XX Full-License	2024-12-30	20.56 MB
v1.00	PG59XX IEC60870-5-101-Serial-Slave	2024-12-30	143.90 MB
v1.00	PG59XX IEC60870-5-104-Ethernet-Server	2024-12-30	143.90 MB
v1.00	PG59XX IEC61850-Ethernet-Server	2024-12-30	143.90 MB
v1.00	PG59XX Modbus-RTU-ASCII-Serial-Slave	2024-12-30	123.34 MB
v1.00	PG59XX Modbus-TCP-Ethernet-Server	2024-12-30	123.34 MB

Utility

VERSION	NAME	TIME	SIZE	DOWNLOAD
v2.0	eNode designer - Caution: PG59xx v0.66 and the older version should use eNode v1.31	2024-12-30	7.18 MB
v1.31	eNode designer - Support PG59xx v0.66 and the older version	2024-12-30	7.18 MB
v1.29.011	eNode designer - Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer	2023-08-11	9.10 MB
v1.28	eNode designer - Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer	2022-07-06	6.49 MB
v1.27	eNode designer - Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer	2021-04-16	6.49 MB
2 older versions
v1.0	Tcpdump for diagnosis	2021-03-29	1.22 MB
v5.60	Management Utility for Windows	2021-01-18	23.65 MB
v5.20	Management Utility for Windows	2016-10-28	16.21 MB
1 older version
v1.26	eNode designer	2020-05-11	6.45 MB

Test reports

VERSION	NAME	TIME	SIZE	DOWNLOAD
	PG5908A Declarations of Conformity	2023-03-16	318.25 KB
v1.0	SE-MB-PG5900A-08A-16A Certifications CE EN55032+EN55024	2019-11-20	1.71 MB
v1.0	SE-MB-PG5900A-08A-16A Certifications CE EN61000-6-4+EN61000-6-2	2019-11-20	1.46 MB
v1.0	SE-MB-PG5900A-08A-16A Certifications FCC	2019-11-20	1.21 MB
v1.0	SE-MB-PG5900A-08A-16A Certifications IEC61850-3	2019-11-20	3.70 MB
v1.0	SE-MB-PG5900A-08A-16A Certifications IEEE 1613	2019-11-20	946.69 KB
v1.0	SE-MB-PG5900A-08A-16A Certifications LVD	2019-11-20	5.32 MB